LED flashlights are the smartest feature ever. No matter the day or night, revive your dead battery with the Powerology portable car jump starter. Bring light into the dark with the built-in 3-watt, 200-lumen flashlight. A useful option at a jump start to make it practical even at night. Camping can come in handy when you need light to relax.
Compatible with petrol and diesel engines
Getting into your car and finding out your battery is dead can make for a really sad day for you. If you think jumper cables are the only solution to this problem, think again. The Powerology Portable Car Jump Starter will start your vehicle without the need for another vehicle to jump start. Both the 6L diesel engine and the 7L petrol engine are compatible with this vehicle's jumper. Wide compatibility with wide functionality will allow you to use Powerology Portable Car Connection Starters in the most advantageous way.
different outlets
Nowadays, portable plug-in players in the car are becoming really popular, however, this device can also be used as a power bank for your devices. Two USB output ports give you the option to charge your phone or tablet fully charged while on the go. One 12-volt outlet doubles as a car cigarette lighter to charge your devices. One entrance for charging, whether with a home or car adapter. The last port is for starter sockets to be fully charged.
installation process
Connect the blue plug fully installed to the host, and make sure that the cable indicator is off.
Connect the Red Clamp to the positive (+) battery terminal, and the Black Clamp to the negative (-) battery terminal.
Operate by following the cable indicator instructions:
The green light has been turned on
If you know the connection is correct and the circuit is working, you can start the motor to start directly.
Red light with buzzing
Telling the connection is incorrect, and the alarm buzzes to correct the clamps as step 2 above, wait for the green light to turn on to start the engine.
Green light flashing with buzzing
Saying the car's battery is low, press the "Boost" button, wait until the green light is solid, then start the engine within 30 seconds.
There is no light with no buzz
Suppose the car battery may be damaged, after confirming that the clamps are connected correctly, press the button: "BOOST", wait until the green light lights up, and then start the engine within 30 seconds.
Start the car
When starting the vehicle, remove the jumper cable from the vehicle battery. Leave the car engine running.
Security notes
Always make sure the jumper cable's blue plug is firmly connected to the jump starter's socket before starting the vehicle. Otherwise, it will affect the results, even causing the blue plug to melt.
Always check whether the jumper clips are well connected. Check if the car battery connector is rusty or dirty, and clean it before jump start the car.
Never jump again after 3 attempts. Otherwise, it will harm the host
Do not connect the clamps. Otherwise, it might be dangerous!
Do not disassemble the host. Otherwise, it might be dangerous!
Features
Compatible with petrol and diesel engines
Equipped with a flashlight
500A starting from 1000A Max Current
Dual USB for mobile phone charging
12 volt outlet for appliances
Customize
Battery: 25,000 mAh
Battery type: Li-ion 92.5Wh
Input: 15V/1A
USB output: 5V / 2A max
DC output: 12V/10A
max current: 1000A
Product weight: 890 grams
Product dimensions: 18.8 * 13 * 3.7 cm
Operating temperature: -20°C to 60°C
- 25000mAh Multi Port Car Battery Charger
- Used for emergency starting of cars and powering of mobile devices
- One end is connected to the jump starter and the other end has clips to connect the positive and negative poles of the car battery
- It is also used to charge the tablet, phone and many other devices
- It operates in a temperature range of -20 to +60 degrees Celsius
- It has two USB output ports with an output voltage of 5V / 2A
- It has a number of DC output ports with a voltage of 12V / 10A
- It has a very bright built-in flashlight on the bottom with an intensity equal to 200 lumens and 3 watts of power
- It is equipped with a powerful Li-Ion 25000 mAh battery and is equipped with an LED indicator to show the remaining charge of the device
- Equipped with multiple internal protection system to protect electrical equipment from power fluctuations, current changes, overvoltages and short circuits
- Shock resistant structure
- Maximum output current: 1000 amps
- Dimensions: 18.8 x 13 x 3.7 cm
- Weight: 890 grams
